The Aliens Legacy
http://www.forum.alienslegacy.com/

help
http://www.forum.alienslegacy.com/viewtopic.php?f=4&t=9790		 Page 1 of 1
Author:  philip7 [ Tue Apr 05, 2011 3:38 pm ]
Post subject:  help
on the front SD pulse rifle block there are several small headlesss grub screws does anyone have any or know the size of these so i can buy some plz ?

note pic not of my PR

Image

many thanks
Author:  Sidewinder [ Tue Apr 05, 2011 3:57 pm ]
Post subject:  Re: help
M4

SAS
Author:  Xhiwar [ Tue Apr 05, 2011 4:01 pm ]
Post subject:  Re: help
No, I think these are 6-32 screws or something, at least that's what I found out from old posts by SD. Or 8-32, I found references to both from SD.
M4 is a close match size-wise, but the threading is much wider than M4. You'll only be able to screw M4 screws in a few mm, which is not enough if you plan to use them to attach to the shotgun.

Cheers!
Roman
Author:  Noble [ Tue Apr 05, 2011 4:12 pm ]
Post subject:  Re: help
Roman,

SD studio hero block are 8-32.

That doesn't mean the actual rifles used them. I would think the originals were metric like Si pointed out.



They are called "set screws"

http://www.mcmaster.com/#set-screws/=bqt8n2
Author:  Xhiwar [ Tue Apr 05, 2011 4:24 pm ]
Post subject:  Re: help
Noble wrote:
Roman,

SD studio hero block are 8-32.

Thanks for clarifying, I was wondering that myself.


Noble wrote:
That doesn't mean the actual rifles used them. I would think the originals were metric like Si pointed out.

That's probably right. It's just that he wants the screws for his SD block, so I offered what I knew. ;)

Cheers!
Roman
Author:  philip7 [ Tue Apr 05, 2011 5:44 pm ]
Post subject:  Re: help
is that the small ones ?

ive got the bigger ones
Author:  philip7 [ Fri Apr 08, 2011 10:59 am ]
Post subject:  Re: help
many thanks got the 8/32 grub screws
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/