The Aliens Legacy
http://www.forum.alienslegacy.com/

TK VP70
http://www.forum.alienslegacy.com/viewtopic.php?f=4&t=6576		 Page 1 of 1
Author:  Eagle [ Sun Jul 26, 2009 12:45 pm ]
Post subject:  TK VP70
Not sure whether this is a new product or just new to this retailer but thought I'd mention it:

http://airsoftglobal.com/product_info.p ... s_id=10100

:)
Author:  Russ Krook III [ Mon Jul 27, 2009 7:44 pm ]
Post subject:  Re: TK VP70
Nope, not a new product. It's been out for a few years now, and has even been recast (with permission) by another
airsoft manufacturer, UHC.

Russ
Author:  SGM Baldwin [ Mon Jul 27, 2009 10:28 pm ]
Post subject:  Re: TK VP70
IIRC, I bought this in 2005 when it came out.
Author:  men-at-arms [ Tue Jul 28, 2009 5:28 am ]
Post subject:  Re: TK VP70
UHC's versions are made in Taiwan under license by KOBA. They cost about 1/2 as much as the Japanese version. They 'might' shoot with higher velocity than KOBA's version, considering UHC are makers of CO2 powered pistols. At the very minimum, the UHC version should have a heavy duty spring'ed valve designed to handle top-gas, because this is what Taiwanese shoot mostly.

The fastest I've been able to get my KOBA VP-70 to shoot is around 270-280 FPS up from around 200 FPS stock, and that's after using top-gas, upgraded KOBA heavy-duty valve, and upgraded Shooter's Design metal slide (wouldn't recommend trying top-gas with a plastic slide and the standard KOBA valve). UHC's metal .45's shoot upwards 350 FPS, some say as fast as 400FPS which is insance for a pistol.
Author:  VS FoxHound [ Wed Jul 29, 2009 10:59 pm ]
Post subject:  Re: TK VP70
All the reviews I've read have put the UHC Vp70 at 300-330 fps on Green Gas (propane.) In fact, I'm trying to get hold of one right now, if I can just get my Marui M9 sold. :P
Author:  Boltrig [ Thu Jul 30, 2009 2:20 am ]
Post subject:  Re: TK VP70
Ill be looking for one too shortly. I full intend on skirmishing in my armour :D
Author:  FIDO [ Thu Jul 30, 2009 1:46 pm ]
Post subject:  Re: TK VP70
i have the UHC vp70 with metal slide + barrel set
its a awesome gun, much bigger then on pics...
mags are compatible with the original koba and all other parts too
the UHC didnt have the koba twist barrel altough its advertised as that..

if you need any infos let me know :D
Author:  men-at-arms [ Thu Jul 30, 2009 3:52 pm ]
Post subject:  Re: TK VP70
Where did you score your metal silde set ? I know they've been sold out for a while. May have to start taking names of commitments to convince Shooter's Design to do more .. AND this time with the VP-70Z markings and not the "M" model. Just have to work out how to do the Z model grip frame next ..

Quote:
I full intend on skirmishing in my armour


As FIDO already knows, we are slated to develop the vac. form version of our armor sets after we get the fiberglass line completely remolded and moved up market to aluminumized gel coats. The specks call for using industrial grade clear polycarbonate sheets thermal vacuum formed on heavy-duty industrial grade machines that have draw depths that are incomparable to home-made or even consumer light duty machines, this along with snap-back technique, we will be able to transfer each minute detail on our FG sets onto the vac. form sets. These will be the entry level armor sets from us that are going to be indestructable AFA taking pounding and BB hits at any velocity. That's the plan .. ;)
Author:  FIDO [ Fri Jul 31, 2009 9:29 am ]
Post subject:  Re: TK VP70
a friend from hk send it to me, he found it in a shop there
it was the last set, so i had luck :D
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/