BTW, if you are the chap I think you are, that was DATA himself you were speaking to at Memorabilia
| The Aliens Legacy http://www.forum.alienslegacy.com/ |
|
| Pulse Rifle metal upgrades http://www.forum.alienslegacy.com/viewtopic.php?f=4&t=5948 |
Page 1 of 1 |
| Author: | 4505marcel [ Tue Mar 31, 2009 8:38 pm ] |
| Post subject: | Pulse Rifle metal upgrades |
HI guys now starting out sourcing my Marine armour, but have picked up my Pulse Rilfe on sunday its a G & P TM airsoft Thompson conversion, has a sling and magazine holder bracket on it sourced from guys on here so Im told. I spoke to a guy at Memorabillia UK this weekend who had some rather nice metal upgrades on his, and was wondering where I can get these parts from. Can someone point me in the right direction please either here or via PM please Cheers guys Marcel |
|
| Author: | PVB [ Tue Mar 31, 2009 8:40 pm ] |
| Post subject: | Re: Pulse Rifle metal upgrades |
What bits were the metal upgrades? |
|
| Author: | 4505marcel [ Tue Mar 31, 2009 8:43 pm ] |
| Post subject: | Re: Pulse Rifle metal upgrades |
mainly the shotgun cage side of it, and grenade inside to replace the shot gun shell. And I also believe he said there was a better sliding stock mechanism? What parts are available for this gun? |
|
| Author: | PVB [ Tue Mar 31, 2009 8:51 pm ] |
| Post subject: | Re: Pulse Rifle metal upgrades |
Sounds like you were looking at a 'Hero' Pulse Rifle, made from the airsoft Thompson and real Spas cage. Others on here have tried (and failed) to just replace the G&P plastic grenade launcher with the real Spas cage. What you could do is just replace the fake shotgun shell in the G&P with a metal one. There are different ones on sale in the PX from time to time. Some people may still have spares, so you may want to post in there. If you're going the Hero route, Phil S. has a large amount of metal and resin parts: Quote: Metal Pulse Rifle Parts Aluminum receiver block (welded to receiver) Aluminum receiver (milled) Aluminum receiver (not milled) Grenade launcher front block Rear shroud connector block Front shroud connector block Front aluminum shroud plate (small trapezoid) Rear aluminum shroud plate (large trapezoid) Steel connector plate for shotgun pump (w/ welding to Remington part) Delrin insulator block for battery connectors Rear shroud strap and connector block Far rear aluminum 1” strap Aluminum barrel Steel triangle for barrel front Aluminum v-shaped barrel shroud Steel buttstock Aluminum triangles for shroud (pair) Miscellaneous screws Metal Totals (milled receiver w/ front block) Metal Totals (non-milled receiver w/ front block) Resin Pulse Rifle Parts Grip Magazine insert Magazine bottom Magazine bottom shroud tabs (pair) Shroud Shroud halves (2) and hardware Digital Counter Electronics Magazine (wired) Prepared magazine All Parts (assembly consultation not included) Metal, Resin, Shroud Totals (milled receiver w/ front block) Metal, Resin, Shroud Totals (non-milled receiver w/ front block) Contact him via his e-mail addy: phil@steinschneider.com for a current price list. Matsuo on here also has various metal and resin parts from time to time. Other parts, such as the metal Spas cage can also be found the the PX section. |
|
| Author: | 4505marcel [ Tue Mar 31, 2009 8:56 pm ] |
| Post subject: | Re: Pulse Rifle metal upgrades |
Cool thanks for your help IL shoot them an email Cheers |
|
| Author: | friendlyskies [ Tue Mar 31, 2009 10:41 pm ] |
| Post subject: | Re: Pulse Rifle metal upgrades |
The PR's you saw at the weekend were a combination of the following: Tokyo Marui airsoft Thompson G&P conversion kit (although mostly it's just the shrouds that are left from that kit now) Real SPAS 12 cage and grip Maruzen M870 gas shotgun Phil S parts: Front Triangle, Barrel vents, Front block, Stock (custom mechanism and modifications made by DATA) The barrel is the G&P one but has been turned down to fit the Phil S triangle. Mag base for use with airsoft mags from Matt Noble of this board. All held together with custom machined parts from DATA of this board. Grenade launcher "shells", custom made by DATA Sling was made by Matt Noble DATA I believe has a thread somewhere on the board with all of the custom parts listed and prices etc, or you could always PM him. You can also check out my web page which lists all of the parts (I think) I've mentioned above with pictures also Click on the "MY Components" tab at the top. http://friendly-skies.co.uk/Pulserifle.html Cheers Darren |
|
| Author: | Ttaskmaster [ Wed Apr 01, 2009 11:31 am ] |
| Post subject: | Re: Pulse Rifle metal upgrades |
BTW, if you are the chap I think you are, that was DATA himself you were speaking to at Memorabilia
|
|
| Author: | 4505marcel [ Wed Apr 01, 2009 2:53 pm ] |
| Post subject: | Re: Pulse Rifle metal upgrades |
Thanks for your help guys, I was dressed as Tusken Raider basically a dirty dress lol! Il shot Data a pm, about it, I just thought the cock on the spas cage was so much better than my G&P one. Cheers |
|
| Author: | PVB [ Wed Apr 01, 2009 4:24 pm ] |
| Post subject: | Re: Pulse Rifle metal upgrades |
4505marcel wrote: I just thought the cock on the spas cage  BTW, can you put your location in your profile, as mentioned here: viewtopic.php?f=3&t=2796 
|
|
| Author: | DATA [ Wed Apr 01, 2009 9:09 pm ] |
| Post subject: | Re: Pulse Rifle metal upgrades |
Yes that was me. If you need any help just PM me. Cheer's Steve |
|
| Author: | PVB [ Wed Apr 01, 2009 10:36 pm ] |
| Post subject: | Re: Pulse Rifle metal upgrades |
DATA wrote: If you need any help just PM me. Cheer's Steve You have a PM to read already.
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|