| The Aliens Legacy http://www.forum.alienslegacy.com/ |
|
| G+P length too long? http://www.forum.alienslegacy.com/viewtopic.php?f=4&t=5174 |
Page 1 of 1 |
| Author: | Noble [ Tue Nov 04, 2008 10:36 pm ] |
| Post subject: | G+P length too long? |
I'm re-furbing my G+P, and judging from the reference picts, It appears to be around 3/4 in too long. Anybody? I've fixed a bunch of inaccurate details on my G+P, and while doing the refurb, I'm doing even more. |
|
| Author: | Bug Stomper [ Tue Nov 04, 2008 11:33 pm ] |
| Post subject: | |
Matt, are you refering to the shroud or the overall length? |
|
| Author: | Noble [ Tue Nov 04, 2008 11:57 pm ] |
| Post subject: | |
Overall length. I know the shroud rear is a tad long, but the overall length is off. I think they modeled the spas cage too long. Real spas length? |
|
| Author: | Noble [ Wed Nov 05, 2008 3:05 am ] |
| Post subject: | |
I'm measuring from the end of the thompson to the end of the spas cage. I'm getting around 61.5 cm Sound right? |
|
| Author: | Bug Stomper [ Wed Nov 05, 2008 9:54 am ] |
| Post subject: | |
I just measured from the flat end of the Thompson receiver (without the bump of the spring guide) to the front of the SPAS cage (without the front block) and got 630.5mm from my CAD-Model. This is based on the real steel parts and was done long before I got the G&P. When I measure the same dimension on the G&P I get about 631mm. So the G&P seems perfectly ok in that regard. Cheers, Stefan |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|