I have one of these and it just fits in one of my real SPAS cages.
I also have a PFC M1A1 too
SAS
| The Aliens Legacy http://www.forum.alienslegacy.com/ |
|
| MGC Remington M31-RS2 Shortie http://www.forum.alienslegacy.com/viewtopic.php?f=4&t=4162 |
Page 1 of 2 |
| Author: | LDR [ Wed May 14, 2008 11:56 am ] |
| Post subject: | MGC Remington M31-RS2 Shortie |
I've been offered an MGC cap firing Rem M31/RS2. Does anyone know if this is a suitable replacement for the 870? I'd love to be able to make a PR from cap PFC models, so hopefully this will work. Anyone got any ideas on this? or is this totally not right, looks very similar in build other than the stock, and the trigger guard, both of which will not be need anyway. Theres one here: http://www.modelguns-worldwide.com/m31law.htm Thanks Lewis |
|
| Author: | Sidewinder [ Wed May 14, 2008 1:17 pm ] |
| Post subject: | |
I have one of these and it just fits in one of my real SPAS cages. I also have a PFC M1A1 too
SAS |
|
| Author: | LDR [ Wed May 14, 2008 1:36 pm ] |
| Post subject: | |
Thanks SAS. Thats great news. So it should be fine? Do you know how it takes down? Does the grip and stock come off easy enough? Have you thought of making a PR with them? LDR |
|
| Author: | Sidewinder [ Wed May 14, 2008 2:05 pm ] |
| Post subject: | |
If its the folding stock version, its a single screw that removes the stock/grip - easy. I got it with the intention of using it for a PR. Thing is it only has a single 'arm' from pump grip to mechanism where the Maruzen has two and its on the 'wrong' side for attaching to the SPAS pump grip. SAS LDR wrote: Thanks SAS. Thats great news. So it should be fine? Do you know how it takes down? Does the grip and stock come off easy enough?
Have you thought of making a PR with them? LDR |
|
| Author: | LDR [ Wed May 14, 2008 2:42 pm ] |
| Post subject: | |
PM sent. thanks sidewinder. |
|
| Author: | noelandlovesguns [ Wed May 14, 2008 8:35 pm ] |
| Post subject: | |
The 870 looks totally different than the 31 guys. Ejections ports are night and day, and with the 31 you're going to have to cut a much bigger hole in your spas cage for the ejection port, maybe even the loading port would have to be cut differently. |
|
| Author: | LDR [ Thu May 15, 2008 9:14 am ] |
| Post subject: | |
Thanks noelandlovesguns, i just realised the ports are different, the 31 being square. Are you sure as its square its not smaller than the 870s? If its smaller its not too much of a problem as its all hidden anyway. If i have to make the hole in the spas bigger, again i think it might worth the trouble to get a PFC working ina PR. What do you guys think? Is this a lost cause or a worth trying? LDR |
|
| Author: | LDR [ Sun Jun 22, 2008 9:27 pm ] | |||
| Post subject: | ||||
well. i've started this build and heres the MGC PFC m31 in a real SPAS cage. I've lined up the m31s ejection port with the centre of the REM SPAS cut, which has been drawn on for now. Nice fit. Barrels need cutting, and trigger guard also. Will need a couple of extra small cust either side of trigger due to safety button ( i think its the safety). So if youre using an MGC m31 there is very little extra that needs doing, than the normal REM cuts.
|
||||
| Author: | noelandlovesguns [ Wed Jun 25, 2008 7:12 pm ] |
| Post subject: | |
Cool, really glad it fits in there, and can't wait to see the final product! |
|
| Author: | Sidewinder [ Thu Jun 26, 2008 10:22 am ] |
| Post subject: | |
be careful cutting the trigger guard off as there might be part of the mechanism inside it, especially the front area - there is on the airsoft. SAS |
|
| Author: | philip7 [ Sun Mar 20, 2011 5:51 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
just bought one of these today cant wait to fit into my PR build.......... |
|
| Author: | LDR [ Sun Mar 20, 2011 5:59 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
Good stuff. a little work but its fits nicely. |
|
| Author: | philip7 [ Sun Mar 20, 2011 6:30 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
LDR wrote: Good stuff. a little work but its fits nicely. just gotta figure out about the cocking arm............ 
|
|
| Author: | LDR [ Sun Mar 20, 2011 7:06 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
just make a metal tube to attach to the SPAS pump. Similiar to how the M31 pump functions. |
|
| Author: | philip7 [ Sun Mar 20, 2011 7:52 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
any tips or links most welcome |
|
| Author: | LDR [ Sun Mar 20, 2011 8:01 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
A couple of pics showing mine:  
|
|
| Author: | philip7 [ Sun Mar 20, 2011 8:10 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
cheers for that mate |
|
| Author: | philip7 [ Mon Mar 21, 2011 4:22 pm ] |
| Post subject: | Re: |
LDR wrote: well. i've started this build and heres the MGC PFC m31 in a real SPAS cage. I've lined up the m31s ejection port with the centre of the REM SPAS cut, which has been drawn on for now. Nice fit. Barrels need cutting, and trigger guard also. Will need a couple of extra small cust either side of trigger due to safety button ( i think its the safety). So if youre using an MGC m31 there is very little extra that needs doing, than the normal REM cuts. did u cut just the right hand side of the cage ? |
|
| Author: | LDR [ Mon Mar 21, 2011 4:46 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
Normal cuts to the spas cage. I did cut holes for the safety button, but i dont think you need them. But i did find the M31 moves down a bit sometimes, and then pushes on the safety. I ended up drilling a hole all the way through the cage and M31 to hold it in place, so it wouldnt slip down. |
|
| Author: | LDR [ Mon Mar 21, 2011 4:47 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
Again, i'll try and take some pics tonight. |
|
| Author: | philip7 [ Mon Mar 21, 2011 6:39 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
anyone know how to rebuild the trigger unit on these ????? |
|
| Author: | LDR [ Mon Mar 21, 2011 6:44 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
has it come apart? or broken? i have a manual i think somewhere,. |
|
| Author: | philip7 [ Mon Mar 21, 2011 7:53 pm ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
ive got a jap manual but not very clear, not broke i hope |
|
| Author: | philip7 [ Tue Mar 22, 2011 7:30 pm ] |
| Post subject: | Re: |
Sidewinder wrote: be careful cutting the trigger guard off as there might be part of the mechanism inside it, especially the front area - there is on the airsoft. SAS dam right there is 2 springs |
|
| Author: | philip7 [ Sat Mar 26, 2011 7:50 am ] |
| Post subject: | Re: MGC Remington M31-RS2 Shortie |
anyone know how number 17 goes in ?? as pic really doesnt show thanks 
|
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|