The Aliens Legacy
http://www.forum.alienslegacy.com/

Old news: New Spring M870...
http://www.forum.alienslegacy.com/viewtopic.php?f=4&t=1335		 Page 1 of 1
Author:  Rook 3 [ Thu Aug 25, 2005 11:34 pm ]
Post subject:  Old news: New Spring M870...
This may be old news, but there's a high quality, mid price M870 springer available.

Made by UTG, it's a Chinese copy of Maruzen's CA870 spring powered shotgun.

[img]http://66.219.104.208/images/818a.jpg[/img]

Image courtesy www.shortyusa.com

The "mag tube" is metal as are the cocking bars that attach to the pump grip. Gun is retailing for about $45 or so, fires at about 260 fps and seems to be higher quality than the all plastic (non Maruzen) ones available. It also has adjustable Hop-Up, which is a pretty slick feataure for a gun this inexpensive.

I'm thinking of picking one up myself. :)
Image

"Time has little to do with infinity and jelly doughnuts."
Author:  uscmCorps [ Fri Aug 26, 2005 1:38 am ]
Post subject:  Re: Old news: New Spring M870...
Curious about the width of the receiver...
Author:  Rook 3 [ Fri Aug 26, 2005 1:41 am ]
Post subject:  Re: Old news: New Spring M870...
I'd imagine it's the same as the Maruzen. Well, wider with the RIS rail attachment thing... attached.

Russ

Image

"Time has little to do with infinity and jelly doughnuts."
Author:  Noeland [ Fri Aug 26, 2005 11:24 pm ]
Post subject:  Re: Old news: New Spring M870...
Is that magazine fixed? The chamber open up when it's racked?
Author:  Rook 3 [ Sat Aug 27, 2005 3:22 am ]
Post subject:  Re: Old news: New Spring M870...
The mag is removeable, and from reports, the eject port cover does move back to reveal the Hop-Up mechanism.

Haven't gotten one for myself yet, so it's all second hand info right now.

Russ

Image

"Time has little to do with infinity and jelly doughnuts."
Author:  MENATARMS [ Sat Aug 27, 2005 5:27 am ]
Post subject:  Re: Old news: New Spring M870...
That looks like the same cheapo I took apart. The magazine is moulded as part of the receiver. It has a hole to fill BBs. The port is not actuated. The size of the receiver fits inside a real SPAS cage though.
[img]http://www.scifimilitary.com/MAA/SFMsig.jpg[/img]
Author:  Rook 3 [ Sat Aug 27, 2005 5:45 am ]
Post subject:  Re: Old news: New Spring M870...
Slightly different one Steve. The box mag is a seperate item, and extras are available for purchase. When you buy the gun you usually get 2 mags with it.

About half the cost of the Maruzen, and double the quality of the cheapie you had. :)

Russ

Image

"Time has little to do with infinity and jelly doughnuts."
Author:  Rumpelteazer [ Sat Aug 27, 2005 5:20 pm ]
Post subject:  Re: Old news: New Spring M870...
I have one of these with a full stock. It's quite nice although the ejection port does not move. I immediately removed the ugly-ass RIS stuff upon getting home because it just doesn't look right. :P
Now all I need is one of those loading port things & I'm set. ;)

I also have one of the cheapies.... damned thing was made -warped- and sent out. >_<
_______________
Fear is funny. You wouldn't think you could jump five inches using only your ass as a propulsion device..
Author:  uscmCorps [ Sat Aug 27, 2005 7:43 pm ]
Post subject:  Re: Old news: New Spring M870...
Rump, are you sure the one you have is made by UTG, and not Maruzen?

-Alex
"The M41-A. When you absolutely, positively have to kill every mofo in the room. Accept no substitutes."
Author:  Rumpelteazer [ Sun Aug 28, 2005 1:58 am ]
Post subject:  Re: Old news: New Spring M870...
Looking at the box right now.. it's by UTG.
Everblast "M87LA" COB Law Enforcement model.
[edit] this one:link [/edit]
_______________
Fear is funny. You wouldn't think you could jump five inches using only your ass as a propulsion device..Edited by: [url=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=rumpelteazer>Rumpelteazer[/url] at: 8/27/05 7:00 pm
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/