Noeland's comment about the noise AEGs make inspired me to share this project I've been working on.
I've been making sound files of my AUG firing since I've been doing upgrades with it. This was mainly to determine the effect of different parts on the sound the gun makes. They are recorded with my Phantom shroud kit installed. Unsilenced has the barrel cap installed at inner barrel length, and silenced has the extra silencer screwed on, and the cap installed at the end.
First off- stock configuration, unsilenced
h1.ripway.com/MWatkins/StockUnsilenced.mp3Stock configuration, silenced
h1.ripway.com/MWatkins/StockSilenced.mp3Systema silent piston + cylinder head, foam around the mechbox, M100 spring, System spring guide, metal bushings.
h1.ripway.com/MWatkins/M100UnSilenced.mp3Same as above, silenced (battery is pretty low in this recording)
h1.ripway.com/MWatkins/M100Silenced.mp3Same as above, but with M120 spring and 9.6v battery (unsilenced)
h1.ripway.com/MWatkins/M120unsilenced.mp3M120, silenced
h1.ripway.com/MWatkins/M120silenced.mp3Same as above, but with a System Duracron piston head replacing the Systema silent head (unsilenced)
h1.ripway.com/MWatkins/Duracron120US.mp3Same as above, silenced
h1.ripway.com/MWatkins/DuracronSI.mp3All recordings were taken with the gun 5 feet away, aimed 90 degrees from the microphone.
Exo2
My Props WebsiteEdited by: [url=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=exoframe2>Exoframe2[/url] at: 12/16/05 4:57 pm
Register
FAQ
Search
Login
