Now, firstly I have no idea if this is the correct size or whether the details are screen-accuarate. It's just something I made and printed out for my PR and it seems to work well.

Hope it's useful. Right click> Save Picture As...

• Image is approx 70mm x 22mm when printed at 300dpi
• Type your desired six-figure serial number (with double spaces in between each digit).
• The font I used was Swiss 721 BT (bold). 'Arial' bold will make a reasonable substitute if you don't have it.
• Best printed on Photo Paper or thick(ish) card.



:8)
----------------------------

[url=http://www.eagletransporter.com]
www.eagletransporter.com[/url] - [url=http://www.eagletransporter.com/]
Eagle Transporter Discussion Forum[/url]

Meh, it's been done.

Here's mine:

[img]http://www.pbase.com/image/57648742/large.jpg[/img]

I guess this is what happens when you're a dinosaur on this board.

Mine's done on a piece of aluminum, this is the material I recommend. I believe Matt also does laser engraved.
<span style="color:lime;]Cpl. Dom "SharP" Beaudoin - USCM Service Number Registrar
A10/TQ1.0.92147E1
<span style="color:yellow;]Need a USCM service number assigned to you? E-mail me at [url=mailto:cplbeaudoin@hotmail.com]cplbeaudoin@hotmail.com[/url]

[img]http://www.pbase.com/image/68371348/original.jpg[/img]

^ It's what I'll be getting round to eventually.
-------------------------------

[url=http://www.eagletransporter.com]
www.eagletransporter.com[/url] - [url=http://www.eagletransporter.com/]
Eagle Transporter Discussion Forum[/url]

I like it.
Consider it saved in my USCM Archive

Maybe print it out on some adhesive labels they use for attaching to steel/aluminum.
Then just get a small metal plate and you are good to go.

Cheap alternatives. I like those.
[img]http://www.colonialmarines.net/Banner.jpg[/img]

No plate is screen accurate. Just leave it up to your
expanded universe imagination. Here are the two that
I did. They are laser cut on 1/16 acrylic. The one you
guys are referencing is done by D.Baena awhile back.




Edited by: [url=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=mnoble2>mnoble2[/url] at: 4/21/07 10:18 am

Well I`ve got these saved now on the puter

Though must admit I`d love to get the engraved one too,if (hopefully) it becomes available again.

Ja
PVT.
STEAD,J "Axeman"
A06/TQ1.0.22140E1
UKCM

Hey, Can you do one up like the first one, for a Smartgun? I like the look of it.
Thanks, Painkiller

Nice work guys!

Derrick