A while ago I saw at least one thread on here from someone who built a functional gun camera/headset for an M56.

I've tried searching and have not been able to find it. Can anyone point me to the thread, or have any information about this kind of build?

Any help would be appreciated.

_________________
Sci-Firepower Prop Collection:
https://www.facebook.com/scifirepower/

This one?

viewtopic.php?f=3&t=19467

_________________
AKA: Simon

Saw that one, but there was an older thread about another build as well

_________________
Sci-Firepower Prop Collection:
https://www.facebook.com/scifirepower/

It might have been me.
viewtopic.php?f=3&t=19068

viewtopic.php?f=3&t=18574&p=265892&hilit=gps+heads+up+display#p265892

I have the stuff mounted but I have to either figure out a sufficient counter weight or go to a full face mask setup to offer more rigid support.

_________________
The impossible takes a while longer and goes over budget too...

I am stuck at this point on getting the gps part programmed in. I am getting prop builder burn out. GNSS and eastern Tennessee does not agree well as the satellite constellation is a on the near verge of failure, and b I am waiting for a tri-band unit to come to market I can use which uses the GNSS, GLONASS, BeiDou, maybe Galileo. Triband GPS is the new hotness as GPS survey and navigation is becoming more desireable as the triband accuracy allows for centimeter level elevation calculation, perfect for say, grading job sites.

To put it in perspective a great excavator can excavate an area 3 inches within grade by eyeballing things. With equipment you could automate the process and have it within a centimeter of grade. Why is grade important? drainage, entrance and exit point sloping, gentler sloping entrances, minimized concrete pours for footers and slabs on top of minimally used gravel underlayment.

A centimeter off grade on a facility expansion means that you could literally reslope pours to something not even noticed. I worked at a facility that had a cat walk that had a 10 foot drop one end to the other. That slope was fun moving a cart load full of switches that weighed a half ton that I had to slow a decent on... Centimeter grading would make that slope non existent as you could compensate with a little extra gravel and level stuff out.

_________________
The impossible takes a while longer and goes over budget too...

Just looked through my 9 odd pages of forum bookmarks [ ], this one maybe? -

Question regarding idea for smart gunner display
http://forum.alienslegacy.com/viewtopic.php?f=3&t=16924

Which also links to these (but links posted here too) -

Could the "Vufine" work in a Smartgunner headset?
http://forum.alienslegacy.com/viewtopic.php?f=3&t=16895

And

SG Headset Eyetop alternative: KS campaign with 6 days left!
http://forum.alienslegacy.com/viewtopic.php?f=3&t=15587

_________________
Cpl Aron "septic" Williams
A10/TQ0.0.82146E1

Thanks everyone, that is very helpful.

My project involves rigging an eyepiece to an SG headset that attaches to a camera on the gun, so I could use it for shooting around corners.

Idea here is to build a functional Airsoft smart gun.

Lots of other obstacles to overcome, but if I'm gonna make the gun, having a functional headset is worth the trouble to me.

_________________
Sci-Firepower Prop Collection:
https://www.facebook.com/scifirepower/

I have it working on mine. The weight is the big big issue on mine as it is throwing it all out of balance.

_________________
The impossible takes a while longer and goes over budget too...